The Earth Movers Forum

Heavy Equipment Forum => General Discussion => Topic started by: backpacker on April 27, 2016, 01:41:53 PM



Title: Parts Availability
Post by: backpacker on April 27, 2016, 01:41:53 PM
Looking to purchase a roller, but new to the industry in general ??? Looking at Komatsu, Caterpillar, and Case models, but concerned about parts availability - any experience here? who's got the best support?


Title: Re: Parts Availability
Post by: Deas Plant on April 30, 2016, 09:48:51 AM
Hi, Backpacker.
                          Without going into performance or any of the other issues surrounding rollers or any other machine and speaking generally 'cos it may vary according to your local dealerships, it is hard to beat Cat for parts and service.

Just my 0.02.


Title: Re: Parts Availability
Post by: backpacker on May 04, 2016, 01:51:31 PM
Hi, Backpacker.
                          Without going into performance or any of the other issues surrounding rollers or any other machine and speaking generally 'cos it may vary according to your local dealerships, it is hard to beat Cat for parts and service.

Just my 0.02.

Hi Deas Plant,

Thanks for the input - no need to get into performance or technical side, more of a general industry question. So what puts Cat on top in terms of parts and service?

Thanks


Title: Re: Parts Availability
Post by: Deas Plant on May 08, 2016, 05:38:04 AM
Hi, Backpacker.
                          Their dealer network and their commitment to service and parts backup, both in their dealerships and in the field.

Just my 0.02.


Title: Re: Parts Availability
Post by: Heavy equipment on July 22, 2016, 10:51:55 PM
Without Experience heavy equipment are buy very difficult   so ask every experience person you can buy old or used heavy equipments on this website htttp://www.heavyequipments.in (http://htttp://www.heavyequipments.in)


Title: Re: Parts Availability
Post by: Greasemonkey on July 28, 2016, 10:42:47 PM
Looking to purchase a roller, but new to the industry in general ??? Looking at Komatsu, Caterpillar, and Case models, but concerned about parts availability - any experience here? who's got the best support?

A Komatsu roller?